جدائلنا الفولاذية الممتازة بسبعة أسلاك تعيد تعريف المتانة والدقة، وتقدم أداءً لا مثيل له لمشاريع البناء واسعة النطاق. مدعومة بتقنيات متقدمة واختبارات جودة صارمة، أسلاك جديلا هي خيار المحترفين في جميع أنحاء العالم.
شركة جديلة للصناعات الفولاذية هي مُنتج رائد للجدائل الفولاذية عالية الأداء بسبعة أسلاك. بفضل تكنولوجيا التصنيع المتقدمة، نلبي متطلبات الشد اللاحق والخرسانة سابقة الإجهاد ومشاريع البنية التحتية واسعة النطاق. تم تصميم أسلاكنا لتحقيق قوة فائقة ومرونة وموثوقية طويلة الأمد.
فيلم VCI وفيلم التغليف المطاطي. توفر لفائف VCI حماية من التآكل، بينما توفر أفلام التغليف المطاطي مقاومة للتآكل والرطوبة. يتم أيضًا تزويد كل لفة بغطاء بولي إيثيلين كامل العرض لمزيد من الحماية.
تم تصميم جدائل PC الخاصة بنا لمشاريع البنية التحتية والصناعية الحيوية التي تتطلب قوة شد ومتانة فائقتين.
صُنعت بدقة ومدعومة بضمان جودة صارم، تم تصميم جدائل جديلا الفولاذية لتتجاوز التوقعات. مُصممة خصيصًا لمشاريع البنية التحتية والصناعية الحيوية التي تتطلب قوة شد ومتانة فائقتين.
Maintains long-term tension with minimal elongation
Withstands heavy loads and extreme environmental conditions
Available in various diameters and tensile strengths to meet project needs
Coated with advanced VCI films for long-lasting protection
Manufactured using eco-friendly processes to minimize environmental impact
The wire rod is drawn through a series of Nine Tungsten carbide dies to achieve the desired mechanical properties.
This is a cold‐working process using the best wire cooling design from world class Technology supplier from Italy, therefore the wire drawing practices are tightly controlled to prevent premature die wear or damage to the steel wire.
In PC Strand wire drawing, the wire rod cross‐sectional area is reduced by ~85% when comparing the finished wire area to the area of the original wire rod.
The key parameters like wire temperature and size of wire is continuously monitored and recorded by machine to maintain wire quality of highest standards. The use of rotating dies , soap stirrers , vibration dumping rollers help to improve die life and overall performance.
Once seven (7) spools of wire are produced, six (6) outer wires and one (1) centre wire, they are loaded into the stranding machine.
The stranding machine pulls the wire off of the spools while maintaining a specified rate of twisting. This rate controls the lay of the strand to comply with specifications.
After the wires have been wound into strand, the strand is subjected to a thermo‐mechanical process in which the strand is continuously heated to (380ºC) +/‐ (10ºC) while under tension at ~40 to 45 % of the minimum ultimate tensile strength of the strand. This process acts to relieve the residual wire drawing stresses, permanently elongate the strand, increase the yield strength and reduce relaxation losses.
This combination of treatment gives the strand a very consistent yield strength up to and exceeding 90% of the strand’s ultimate strength.
Before the strand is wound back into a coil, it is quenched in a water bath to freeze the steel in the permanently elongated condition and to rinse residual drawing lubricants from the strand surface.
After one master coil (one production run) of strand is produced in the strand, the master coil is rewound into the desired package size, typically 3 to 3.5 T.
Sampling for compliance to ASTM A416-18 and BS 6896:2012 is done at this stage of production and is tested and test results recorded using the highest technology testing equipment.
At this point or at time of shipment, the finished coil of strand is packaged according to customer specifications and is provided with stress strain graph and Test certificate.
Seaworthy packaging is provided to ensure rust free preservation and to resist normal wear during storage and handling. The coil is pasted with handling instruction sticker to provide guidance and prevent damage during handling.
JSI has installed smart manufacturing software using most modern Industry 4.0 IOT technology deployed in manufacturing machines , Cloud based App helps increase productivity and maintain it at it’s best.
The software works with cloud based IIOT operating system from Siemens. The advantages of software include remote monitoring, monitoring OEE and provide KPI analysis for many variables like power consumption, die life, Exceeding thresholds, statistical data for wire dia , temperature , Breakdown analysis like MTBF, MTTR and Pareto chart and many tools of analysis.
في جديلا، الجودة ليست مجرد وعد—بل هي أساسنا. يخضع كل منتج لاختبارات صارمة ويلتزم بالمعايير العالمية لضمان أقصى قدر من الموثوقية والأداء.
Ready to take the next step? Get a personalized quote for your steel solutions today. Whether it’s 7-wire PC strands or innovative steel construction systems, we’re here to deliver quality tailored to your project’s needs.
